stock photo house construction.

Company Sold Safety Gear as Made in USA, but FTC Found 68 Imported Components

When you buy a product labeled “Made in USA,” you probably expect more than a company simply putting the final pieces together on American soil. Whether it’s a garden tool, a ladder, or equipment used on a construction site, that label can influence where shoppers spend their money.

That’s why an Alabama safety equipment manufacturer is facing federal action over claims that its products were American-made. According to the Federal Trade Commission, Elk River Inc. promoted its safety harnesses as a premium domestic alternative to cheaper imports, even though dozens of their components came from overseas.

Some of those imported parts were essential to connecting workers to safety lines and stopping potentially deadly falls. The FTC isn’t alleging that the equipment was defective. Instead, regulators say customers were misled about where the products came from, raising questions about the promises manufacturers make to earn their trust.

Now Elk River has agreed to a proposed settlement involving a $4.4 million judgment. There’s a surprising catch: The company would initially pay just $72,527.50, with the rest suspended because of its reported financial circumstances. The case also raises a question relevant to anyone buying tools, appliances, or outdoor equipment: What does “Made in USA” actually guarantee?

More Than a Label

Embedded media follows; please allow a moment to load.

Elk River, based in Cullman, Alabama, manufactures safety harnesses and other fall-protection equipment for people working at heights, including construction crews and tower climbers.

The company offers 130 harness models and sells thousands annually through authorized dealers and distributors. According to the FTC’s November 17 complaint, Elk River didn’t simply advertise its products as American-made. It also portrayed itself as a higher-end domestic alternative to inexpensive imports.

In promotional language cited by regulators, Elk River described itself as “not the low cost import you purchase to save a dollar.” The company emphasized protection, comfort, and worker safety as reasons to choose its equipment.

That positioning matters because customers weren’t just purchasing fall-protection equipment. They were being encouraged to associate the brand with domestic manufacturing and an alternative to imported products.

Elk River assembled its harnesses in Alabama, but the FTC says 68 of the 143 components and materials used in its harnesses originated outside the United States.

Those imports came from six countries: Taiwan, China, Vietnam, Japan, South Korea, and Mexico. Taiwan accounted for 34 components and materials, while China supplied another 17.

Among the imported parts were metal D-rings, carabiners, snap hooks, and self-retracting lifelines. These aren’t decorative accessories. They help connect workers to safety systems and arrest falls.

A D-ring provides a secure attachment point between a harness and a lifeline. A self-retracting lifeline works somewhat like a vehicle seat belt, allowing movement while locking when a sudden fall occurs.

The FTC has not alleged that Elk River’s harnesses were defective or failed safety standards. Its complaint concerns the accuracy of the company’s advertising, particularly its failure to disclose substantial imported content while promoting the finished products as American-made.

What Made in USA Means

Imagine comparing two similar power tools at a hardware store. One prominently advertises that it’s made in America. You might choose that product because you want to support domestic manufacturing, even if it costs more.

Federal labeling rules are designed to protect consumers who rely on those claims when making purchasing decisions.

Under the FTC’s Made in USA standard, a product generally cannot carry an unqualified American-made claim unless its final assembly, significant processing, and all or virtually all of its components are domestic.

That doesn’t mean every product containing an imported part is prohibited from mentioning American manufacturing. Companies may use truthful, appropriately qualified descriptions that explain their domestic operations and imported content.

For example, a product might accurately state that it’s assembled in the United States using imported components. However, even an American assembly claim must be supported by substantial assembly operations, not merely a minor finishing step performed domestically.

The distinction is important because shoppers may interpret “Made in USA” as a broader promise about where a product and its components originated.

According to the FTC, Elk River made unqualified American-origin claims across its website, promotional materials, social media, and product labels for years.

The federal complaint documents website claims from at least June 2022 through June 2026 and identifies similar labeling on harnesses beginning in August 2021. Regulators allege that Elk River stopped the disputed practices only after the agency began investigating.

A $4.4 Million Catch

The financial terms of the proposed settlement are unusual enough to warrant a closer look.

Under the agreement filed November 17, Elk River would face a monetary judgment of $4,367,640.74. Yet the company would initially have to pay just $72,527.50, with the remaining balance suspended.

That’s a difference of more than $4.2 million between the proposed judgment and the initial payment.

The FTC agreed to the suspension based on financial information provided by the company. However, the unpaid amount wouldn’t simply disappear without conditions.

If a federal court later determines that Elk River concealed material assets or misrepresented its financial circumstances, the suspended judgment could become payable, minus any amount already paid and with applicable interest.

The proposed order would also prohibit the company from making misleading claims about the origins of its products. It would not require Elk River to stop selling its harnesses.

Elk River has neither admitted nor denied the FTC’s allegations, apart from admitting the facts needed to establish the court’s jurisdiction. The proposed settlement still requires judicial approval.

Customers May Get Emails

People who purchased Elk River harnesses could eventually receive an unusual message from the manufacturer: an explanation that the products they bought were not entirely or virtually entirely American-made, despite how they were advertised.

The proposed settlement includes a prepared customer notice. In it, Elk River would be required to explain that the FTC sued over allegedly misleading country-of-origin claims and that its harnesses contain significant imported components, including D-rings.

For someone who deliberately selected Elk River because of its American-made advertising, that could be important information to learn after the purchase.

If the order is approved, the company must identify customers who purchased its safety harnesses between August 1, 2021, and June 10, 2026, using the records available to it.

Elk River would then have to email identified customers within 30 days after the order takes effect. Additional customers identified later would also have to receive notices within 30 days of being identified.

Not everyone who wore one of the company’s harnesses would necessarily receive a message. Elk River sells through authorized dealers and distributors rather than directly to end users, which may affect what customer information is available.

The proposed order also contains a separate provision requiring the company to provide information to help the FTC administer potential consumer relief for purchases made between May 8, 2023, and June 10, 2026.

Money collected through the settlement could be used for consumer compensation, but the agreement does not guarantee refunds or establish a specific payment for every purchaser.

Importantly, the case is not a product recall. The FTC has not instructed workers to stop using Elk River harnesses as part of this enforcement action.

What Happens Next?

Most homeowners won’t be shopping for professional tower-climbing harnesses, but the dispute involves a familiar purchasing decision. Country-of-origin labels can influence whether someone chooses one product over another, particularly when supporting American manufacturing is important to them.

For shoppers, the wording matters. “Made in USA,” “Assembled in USA,” and “Made in USA with imported parts” don’t necessarily communicate the same thing. A manufacturer’s claim should accurately reflect the work performed domestically and the origins of its materials.

For Elk River, the next step is a federal judge’s approval of the proposed settlement. The FTC announced the action on November 17, 2026, and its public case page continued to list the proceeding as pending as of November 21.

If the judge approves the agreement, Elk River would be required to make its initial $72,527.50 payment within seven days of the order taking effect. The customer notification requirements would follow, giving identified purchasers an explanation of the origin claims that brought the company under federal scrutiny.

Author

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *